KBC Nomad Ed Hardy Dead Or Alive Matte Half Helmet - Sizing
KBC Helmets
| cm |
55 - 56 |
57 - 58 |
59 - 60 |
61 - 62 |
63 - 64 |
| Hat Size |
6¾ - 67/8 |
7 - 71/8 |
7¼ - 73/8 |
7½ - 75/8 |
7¾ - 77/8 |
| Inches |
21.7 - 22 |
22.4 - 22.8 |
23.2 - 23.6 |
24 - 24.4 |
24.8 - 25.2 |
General Sizing information
If you are unsure about your size, compare your body measurements to the charts provided to determine the correct fit. These charts will give you a good idea of the size to order, but be sure to read special sizing information that may accompany an item description. Some merchandise dimensions may vary from the averages charted here.
How to Fit a Helmet and Retention System
The best way to put on the helmet is to hold the chin straps to each side before pulling it over your head. Pass the end of the strap through the D-rings and pull it snug. Keeping your head straight, rotate the helmet from side to side with your hands. If helmet is adjusted properly, you should feel the movement of your scalp closely match the helmet's movement. With your hands on the sides of the helmet, move the helmet in a slight up and down motion. Once again, the movement of your skin should follow the helmet movement. To remove the helmet, pull the D-ring tab outward to release strap tension, then unthread the chin strap. Pull the chin straps outward, rotate the helmet forward and lift it off.
Note:
- No helmet can protect the user against all foreseeable impacts.
- For maximum protection, the helmet must provide adequate peripheral vision.
- All retention straps (chin straps) must be securely fastened.
- The helmet can be seriously damaged by some common substances with damage being invisible to the user. Apply only mild soap and water for cleaning.
- Make no modifications to the helmet. If the helmet experiences a severe blow, please replace it.